S11 Type 10kv Series Low Loss Distribution Transformer

Here's detailed information about company's product "S11 Type 10kv Series Low Loss Distribution Transformer". You're welcome to contact us if you have any doubts.

                                                                           email: sales@zjyb-electric.com     tel: +86-577-62566535

S11 power transformer is in development at S9 series transformer.It is in low loss, low noise, capable of short-circuit, good impact resistance and Well-run performance.
It applies new type insulation structure and improves the ability of short-circuit resistance.The iron core is made of high-quality cold-rolled silicon-steel plate.High-voltage winding group is made of high quality copper wires and it adopts multilayer cylindrical structure.All fasteners have been processed with special treatment to prevent them from loosening.

Environmental conditions of S11 Type 10kv Series Low Loss Distribution Transformer

1.Type:Outdoor
2.Normal Service Conditions:
3.The height above the sea level is below 1000m;
4.Ambient temperature: Highest air temperature+40 ℃, Lowest air temperature-25℃
5.Relative air humidity:≤90%(+25℃)
6.installation site: no corrosion gas, No obvious dirt
For Agricultural power distribution and lighting

Transformer Standard of S11 Type 10kv Series Low Loss Distribution Transformer

GB1094.1~2-1996 power transformer
GB1094.3,5-2003 power transformer
GB/T6451-2008 Three phase oil immersed power transformer

Model description:

Features of S11 Type 10kv Series Low Loss Distribution Transformer:

A.Good heat emission, big overload capacity. Can work without wind machine for long time under 130 overload, and be full load without compulsive wind cool without capacity descending under IP45 condition.

B.Perfect safe and resistance to fire operating can be combusting for long period under 800ºC and without smoke
C.Strong resistance to thermal shock(can be full load immediately at -50ºC) 
D.Complete waterproof and airproof.
E.No partial discharge 
F. Good hydrophobility and good resistance to alkaline cauterization and fundal influence 
G. Environmental, low noise, no deleerious gas, easy to decomposition.

S13-M Type 10kv Series Low Loss Distribution Transformer

Here's detailed information about company's product "S13-M Type 10kv Series Low Loss Distribution Transformer". You're welcome to contact us if you have any doubts.

                                                                           email: sales@zjyb-electric.com     tel: +86-577-62566535

General introduction of S13-M Type 10kv Series Low Loss Distribution Transformer

S13 transformer is in development at S9 series transformer.It is in low loss, low noise, capable of short-circuit, good impact resistance and Well-run performance.
It applies new type insulation structure and improves the ability of short-circuit resistance.The iron core is made of high-quality cold-rolled silicon-steel plate.High-voltage winding group is made of high quality copper wires and it adopts multilayer cylindrical structure.All fasteners have been processed with special treatment to prevent them from loosening.

Environmental conditions of S13-M Type 10kv Series Low Loss Distribution Transformer

1. Type:Outdoor
2. Normal Service Conditions:
3. The height above the sea level is below 1000m;
4. Ambient temperature: Highest air temperature+40 ℃, Lowest air temperature-25℃
5. Relative air humidity:≤90%(+25℃)
6. installation site: no corrosion gas, No obvious dirt
For Agricultural power distribution and lighting

Transformer Standard of S13-M Type 10kv Series Low Loss Distribution Transformer:

GB1094.1~2-1996 power transformer
GB1094.3,5-2003 power transformer
GB/T6451-2008 Three phase oil immersed power transformer

Model description:

Features of S13-M Type 10kv Series Low Loss Distribution Transformer:

A. Good heat emission, big overload capacity. Can work without wind machine for long time under 130 overload, and be full load without compulsive wind cool without capacity descending under IP45 condition.

B. Perfect safe and resistance to fire operating can be combusting for long period under 800ºC and without smoke
C. Strong resistance to thermal shock(can be full load immediately at -50ºC) 
D. Complete waterproof and airproof.
E. No partial discharge 
F. Good hydrophobility and good resistance to alkaline cauterization and fundal influence 

G. Environmental, low noise, no deleterious gas, easy to decomposition.

SZ11 Type 35kv Series On-Load Regulator Transformer

Here's detailed information about company's product "SZ11 Type 35kv Series On-Load Regulator Transformer". You're welcome to contact us if you have any doubts.

                                                                           email: sales@zjyb-electric.com     tel: +86-577-62566535

This transformer meet the criteria of GB1094 and GB/T6451.The replacements on the material,technique and structure make the electric performance reaches the world advanced level in the industrial.The characteristics are high efficiency and low loss,to save the electrical amount and freight.It is one of the most popular models and popularized by the users.

Environmental conditions:

1.Type:Outdoor

2.Normal Service Conditions:

3.The height above the sea level is below 1000m;

4.Ambient temperature: Highest air temperature+40 ℃, Lowest air temperature-25℃

5.Relative air humidity:≤90%(+25℃)

6.installation site: no corrosion gas, No obvious dirt

For Agricultural power distribution and lighting

Transformer Standard of SZ11 Type 35kv Series On-Load Regulator Transformer:

GB1094.1~2-1996 power transformer

GB1094.3,5-2003 power transformer

GB/T6451-2008 Three phase oil immersed power transformer

Model description:

Features of products of regulator transformer:

A.OLTC transformer meet the user’s requirement to voltage.Imporve the quality of power supply and save the energy.

B.With the high conductivity material of silicon steel sheet,multi-lamination mitred joint,it lowers the no-load loss and no-load current of the core.

C.The high voltage winding uses continuous connection,while low voltage winding uses continuous or helical connection.It has high mechanical strength,ampere-turns balanced distribute and good ability of resistance against short circuit.

D.The tank is in bell or barrel type with corrugated wall makes the equipment nice surface and high mechanical strength.The critical area is connected by precision machnied flange to avoid leakage.

SG(B) 10 Type 10kv Series Non Encapsulated Coil Transformer

Here's detailed information about company's product "SG(B) 10 Type 10kv Series Non Encapsulated Coil Transformer". You're welcome to contact us if you have any doubts.

                                                                           email: sales@zjyb-electric.com     tel: +86-577-62566535

General introduction of SGB10 Cast Resin Transformer:

Cast Resin Transformer, is well applied in power plant substation with low voltage device, high voltage device, transformer and other components integrated, greatly recognized by its functional and energy saving properties. It is safe, non-pollute, and flame proof which can be installed directly on the load centre with the merits of free maintenance, easy installation, low combined operation cost, low loss and excellent humidity resistance.

Service condition:

The height above the sea level is below 1000m.

Ambient temperature:

Highest air temperature +40ºC

Highest daily average air temperature +30ºC

Highest annual average air temperature+20v

Lowest outdoor air temperature-25ºC

The scope of application:

Applies to high fireproofing, load fluctuating, unventilated, incommodious, dirty and moist environment such as power plant field, subway, metallurgy, hospital, high-rise building, shipping center, crowded resident zone, and the special environment such as petrol-land chemical industry, nuclear power station, nuclear submarine.

Product features(advantages )of SGB10 Cast Resin Transformer:

A.Good heat emission, big overload capacity. Can work without wind machine for a long time under 130 overloads, and be full load without compulsive wind cool without capacity descending under IP45 condition.

B.Perfect safe and resistance to fire operating can be combusting for long period under 800ºC and without smoke

C.Strong resistance to thermal shock(can be full load immediately at -50ºC)

D.Complete waterproof and airproof.

E.No partial discharge

F. Good hydrophobicity and good resistance to alkaline cauterization and fundal influence

G. Environmental, low noise, no deleterious gas, easy to decomposition.

Product Certification of Yuebian SGB10 Cast Resin Transformer:

KS9 Type 6-10kv Series Distribution Oil-Immersed Transformer

Here's detailed information about company's product "KS9 Type 6-10kv Series Distribution Oil-Immersed Transformer". You're welcome to contact us if you have any doubts.

                                                                           email: sales@zjyb-electric.com     tel: +86-577-62566535

General introduction of KS9 series mining flameproof dry-type transformer:

This series of transformer silicon steel core which is composed of crystal particles of low loss of outstanding. They have the advantages of small low no-load loss, no-load current and low noise.

The box structure is strong, can withstand a normal pressure.

KS9 series transformer is suitable for coal mine underground substation, bottom, the total inlet duct and the main air duct, although there is no gas but dangerous places. Also applies to tunnel more humid environment.

Service conditions:

a. The height of sea level is less than 1000m.

b. Highest temperature 40ºC

c. Lowest temperature: -20ºC

d. Maximum daily average temperature: 25ºC

e. Maximum annual mean temperature: 20ºC

f. The relative humidity is less than 95%(when the sir temperature is 25ºC)

g. Install at the site with dust methane, but no explosion water

h. Power supply voltage profile approximate to sine wave

Scope of application:

It suits for center substation, mine stop, general wind bypass and main wind bypass which has gas but no explosion danger, and the moisture environment.

Product features(advantages )of KS9 series mining flameproof dry-type transformer:

A.Adopt silicon steel sheet iron core which is made of excellent low loss crystal granule.

B. Low no-load loss, small no-load current and low noise.

Deliver and shippment of KS9 series mining flameproof dry-type transformer:

Sea transportation. 1 set Transformer per wooden carton.

Production process of KS9 series mining flameproof dry-type transformer：

SC(B) Type 10kv Series Resin Insultation Dry-Type Transformer

Here's detailed information about company's product "SC(B) Type 10kv Series Resin Insultation Dry-Type Transformer". You're welcome to contact us if you have any doubts.

                                                                           email: sales@zjyb-electric.com     tel: +86-577-62566535

Cast Resin Transformer, is well applied in power plant substation with low voltage device, high voltage device, transformer, and other components integrated, greatly recognized by its functional and energy saving properties. It is safe, non-pollute, and flameproof which can be installed directly on the load center with the merits of free maintenance, easy installation, low combined operation cost, low loss and excellent humidity resistance.

Product specification of SGB10 Cast Resin Transformer:

Service condition:

The height above the sea level is below 1000m.

Ambient temperature:

Highest air temperature +40ºC

Highest daily average air temperature +30ºC

Highest annual average air temperature+20v

Lowest outdoor air temperature-25ºC

The scope of application:

Applies to high fireproofing, load fluctuating, unventilated, incommodious, dirty and moist environment such as power plant field, subway, metallurgy, hospital, high-rise building, shopping center, crowded resident zone, and the special environment such as petrol-land chemical industry, nuclear power station, a nuclear submarine.

Product features(advantages )of SGB10 Cast Resin Transformer:

A.Good heat emission, big overload capacity. Can work without wind machine for a long time under 130 overloads, and be full load without compulsive wind cool without capacity descending under IP45 condition.

B.Perfect safe and resistance to fire operating can be combusting for long period under 800ºC and without smoke

C.Strong resistance to thermal shock(can be full load immediately at -50ºC)

D.Complete waterproof and airproof.

E.No partial discharge

F. Good hydrophobicity and good resistance to alkaline cauterization and fundal influence

G. Environmental, low noise, no deleterious gas, easy to decomposition.

S15-M Type Oil-Immersed Amorphous Alloy Distribution Transformer

Here's detailed information about company's product "S15-M Type Oil-Immersed Amorphous Alloy Distribution Transformer". You're welcome to contact us if you have any doubts.

                                                                           email: sales@zjyb-electric.com     tel: +86-577-62566535

General introduction of S15-M Type Oil-Immersed Amorphous Alloy Distribution Transformer

S15 transformer is in development at S9 series transformer.It is in low loss, low noise, capable of short-circuit, good impact resistance and Well-run performance.
It applies new type insulation structure and improves the ability of short-circuit resistance.The iron core is made of high-quality cold-rolled silicon-steel plate.High-voltage winding group is made of high quality copper wires and it adopts multilayer cylindrical structure.All fasteners have been processed with special treatment to prevent them from loosening.

Environmental conditions:

1.Type:Outdoor
2.Normal Service Conditions:
3.The height above the sea level is below 1000m;
4.Ambient temperature: Highest air temperature+40 ℃, Lowest air temperature-25℃
5.Relative air humidity:≤90%(+25℃)
6.installation site: no corrosion gas, No obvious dirt
For Agricultural power distribution and lighting

Transformer Standard:

GB1094.1~2-1996 power transformer
GB1094.3,5-2003 power transformer
GB/T6451-2008 Three phase oil immersed power transformer

Model description of S15-M Type Oil-Immersed Amorphous Alloy Distribution Transformer:

SZ11 Type 10kv Series On-Load Regulator Transformer

Here's detailed information about company's product "SZ11 Type 10kv Series On-Load Regulator Transformer". You're welcome to contact us if you have any doubts.

                                                                           email: sales@zjyb-electric.com     tel: +86-577-62566535

This electrical transformer meet the criteria of GB1094 and GB/T6451.The replacements on the material,technique and structure make the electric performance reaches the world advanced level in the industrial.The characteristics are high efficiency and low loss,to save the electrical amount and freight.It is one of the most popular models and popularized by the users.

Environmental conditions:

1.Type:Outdoor

2.Normal Service Conditions:

3.The height above the sea level is below 1000m;

4.Ambient temperature: Highest air temperature+40 ℃, Lowest air temperature-25℃

5.Relative air humidity:≤90%(+25℃)

6.installation site: no corrosion gas, No obvious dirt

For Agricultural power distribution and lighting

Transformer Standard:

GB1094.1~2-1996 power transformer

GB1094.3,5-2003 power transformer

GB/T6451-2008 Three phase oil immersed power transformer

Model description of SZ11 Type 10kv Series On-Load Regulator Transformer:

Features of products:

A.OLTC transformer meet the user’s requirement to voltage.Imporve the quality of power supply and save the energy.

B.With the high conductivity material of silicon steel sheet,multi-lamination mitred joint,it lowers the no-load loss and no-load current of the core.

C.The high voltage winding uses continuous connection,while low voltage winding uses continuous or helical connection.It has high mechanical strength,ampere-turns balanced distribute and good ability of resistance against short circuit.

D.The tank is in bell or barrel type with corrugated wall makes the equipment nice surface and high mechanical strength.The critical area is connected by precision machnied flange to avoid leakage.

SFZ11 Type 35kv Series On-Load Regulator Transformer

Here's detailed information about company's product "SFZ11 Type 35kv Series On-Load Regulator Transformer". You're welcome to contact us if you have any doubts.

                                                                           email: sales@zjyb-electric.com     tel: +86-577-62566535

General introduction of on-load regulator transformer:

This transformer meets the criteria of GB1094 and GB/T6451.The replacements on the material ,technique, and structure make the electric performance reaches the world advanced level in the industrial.The characteristics are high efficiency and low loss, to save the electrical amount and freight.It is one of the most popular models and popularized by the users.

Environmental conditions of on-load oil immersed transformer:

1.Type: Outdoor

2.Normal Service Conditions:

3.The height above the sea level is below 1000m;

4.Ambient temperature: Highest air temperature+40 ℃, Lowest air temperature-25℃

5.Relative air humidity:≤90%(+25℃)

6.installation site: no corrosion gas, No obvious dirt

For Agricultural power distribution and lighting

Transformer Standard:

GB1094.1~2-1996 power transformer

GB1094.3,5-2003 power transformer

GB/T6451-2008 Three phase oil immersed power transformer

Model description:

Features of products:

A.OLTC transformer meet the user’s requirement to voltage.Imporve the quality of power supply and save the energy.

B.With the high conductivity material of silicon steel sheet,multi-lamination mitred joint,it lowers the no-load loss and no-load current of the core.

C.The high voltage winding uses continuous connection,while low voltage winding uses continuous or helical connection.It has high mechanical strength,ampere-turns balanced distribute and good ability of resistance against short circuit.

D.The tank is in bell or barrel type with corrugated wall makes the equipment nice surface and high mechanical strength.The critical area is connected by precision machnied flange to avoid leakage.

KBSG9-50~1600/10 Mining Explosion Isolation Dry Transformer

Here's detailed information about company's product "KBSG9-50~1600/10 Mining Explosion Isolation Dry Transformer". You're welcome to contact us if you have any doubts.

                                                                           email: sales@zjyb-electric.com     tel: +86-577-62566535

General introduction of KBSG9 series mining flameproof dry-type transformer:

KBSG9 series mining flameproof dry-type transformer suit for not only mines filled with firedamp mixed gas, grime and explosive gas, but also the gas and steam environment that can not erode metal or destroy insulation. The transformer has the merit of high strength, low temperature rise, good cooling and waterproof property, and easy maintenance.

Service conditions:

a. The installation is not higher than 1000m(normal)special environment gives explanation in addition

b. Ambient temperature

Highest temperature: 40ºC

Maximum monthly average temperature: 30ºC

Maximum annual temperature: 20ºC

Lowest temperature: -5ºC

c. The surrounding air relative humidity is not greater than 95%(25ºC)

d. In the mine, with methane, dust explosion danger is well

e. No vibration the gradient is less than 15ºC

f. No gas or steam to corrode metal needed or destroy insulation

g. Non-water drop sit

h. Power supply voltage profile approximate to a sine wave

i. The three-phase supply voltage approximate symmetrical

The scope of application:

Mine filled with fire damp mixed gas, grime and explosive gas; The gas and steam environment that can not erode metal or destroy insulation.

Product features(advantages )of KBSG9 series mining flameproof dry-type transformer:

A.The KBSG9-50-1600/10(6) mining flameproof of dry type transformer conforms to GB8286-2005 the requirement of "mining flameproof movable substations", its no-load, load loss is 10% less than original standard the no-load current short-circuit impedance has diminished too.

B.The insulation material adopt the H level or the C level insulation material, the thermal is good, it is suited for long time operation

C.3 Phases, 50 Hz, ANAN

D. High strength, low-temperature rise, good cooling and waterproof propert, and easy maintenance.

Deliver and shipment of KBSG9 series mining flameproof dry-type transformer:

Sea transportation. 1 set Transformer per wooden carton.

The production process of KBSG9 series mining flameproof dry-type transformer: